Important Aspects of Assessment Validation: How to Validate Assessments

Important Aspects of Assessment Validation: How to Validate Assessments

Blog Article

Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.

Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.

Validation involves verifying which areas of an RTO's assessment process are correct and highlighting where improvements are needed. Understanding its key components makes the task less intimidating.

Clause 1.8 of the 2015 SRTOs indicates that RTOs need to ensure their assessment systems, including RPL, are compliant with training package requirements and conducted in accordance with the Principles of Assessment and Rules of Evidence.

The standards require RTOs to perform two types of validation.

The initial assessment validation ensures your RTO's assessments comply with the training package requirements.

The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.

Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.

Understanding the Two Types of Assessment Validation

An Introduction to Assessment Validation

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.

On the other hand, post-assessment validation deals with implementation, ensuring Registered Training Organisations follow the Principles of Assessment and Rules of Evidence.

Here, we will concentrate on assessment tool validation.

How to Conduct Assessment Tool Validation

Having discussed the two types of validation, let’s delve into assessment tool validation.

Timing of Assessment Tool Validation

The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.

You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.

However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:

- when resources are updated
- new training products are added on scope
- review your course against training product updates
- when learning resources are identified as a risk during your risk assessment

The Australian Skills Quality Authority's risk-based approach means RTOs should carry out regular risk assessments. If students complain about learning resources, it's an ideal time for assessment tool validation.

Which Training Products to Validate?

Keep in mind, this validation ensures that all learning resources comply before use. All RTOs must validate resources for each unit.

Resources Required for Assessment Tool Validation

Learning Resources

Given that you are validating your assessment tools, you will need the complete array of your learning resources:

Mapping tool – the initial document to investigate. It identifies which assessment items address unit requirements, helping speed up validation.

Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.

Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are included. Clear benchmarks are key to reliable assessment outcomes.

Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.

Validation Board

Clause 1.11 specifies the criteria for validation panel members, indicating that validation can involve one or more persons. RTOs usually require all trainers and assessors to participate, sometimes including industry experts.

Your validation panel, as a group, must possess:

Current vocational competencies and relevant industry skills for the unit being validated

Up-to-date knowledge and skills in vocational teaching and learning

One of these training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or the equivalent successor

Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, here it can serve as your document evidence that you have validated your resources before letting the students use them.
It also serves as evidence that you have validated your resources before students use them.

ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.

Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.

We recommend using a more detailed template to examine each unit requirement and the assessment items that correspond to them. Here is an example:

Element Performance Criteria Assessment Guidelines Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Requires Checking?

As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.

Key Principles of Assessment
Fairness – Are equal opportunity and access ensured for everyone in the assessment process?

Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?

Validity – Does the assessment test what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment produce the same results each time, regardless of who conducts the training? Will different assessors make consistent decisions on skill competence?

Fundamental Rules of Evidence

Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool confirming that the work is the candidate’s own?

Currency – Do the assessment tools correspond to current units of competency and industry practices?

Although these are regularly covered in VET professional development and nationally recognised training, numerous tools still struggle to meet these requirements.

To avoid employing learning resources that leave unit requirements unmet, be sure to follow these guidelines:

Show What You Mean

Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

diaper change

prepare bottles, feed babies from bottles, and clean equipment

prepare solid foods and feed babies

appropriately respond to infant signs and cues

prepare infants for sleep and soothe them

monitor and promote physical exploration and gross motor skills suitable for the age

Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Be Mindful of Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.

Entire or Not Competent

Pay attention to lists. Again, as illustrated above, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Clarify Further

Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What information can be included in a work package?

Possible answers may include:

Required resources

Related costs

Activity length

Assigned duties and responsibilities

When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:

Identify a hazard and/or environmental concern in the work area and select the most effective hazard control hierarchy.

Answers can include, but are not limited to:

Weather conditions – work area isolation, engineering, PPE

Work area and ground conditions – elimination, isolation, engineering

People – isolation, use of engineering controls, administrative controls

Structural hazards – substitution, isolation, engineering controls

Chemical hazards – isolating, use of engineering controls, administration

Equipment or machinery – isolation, engineering, administrative controls

Steering clear of double-barrelled questions simplifies responses for students and enables assessors to accurately judge competence.

Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.